• Cast Aluminum Construction • Buna-N Mechanical Seal and O-ring • 1-1/4" NPT Suction and Discharge Port • Self-Cleaning, Semi-Open Impeller • 1/4 HP, 115 VAC Single Phase Open Drip Proof (ODP) 1725 RPM 48Z Frame Motor • Continuous Duty Motor
• Cast Iron Construction for Abrasive Resistance and Durability • Silicon Carbide/Viton? Mechanical Seal • Buna-N Check Valve and O-Ring • Self-Priming to 20 Ft. • Stainless Steel Semi-Open, Clog Resistant Impeller • Easy Cleanout Design - Pull-from-Rear Design Permits Clean Out and Repair Without Removing Piping
• 300 Series Investment Cast Stainless Steel Construction • Viton? Mechanical Seal and O-Ring • Handles Liquids and Chemicals with Specific Gravities up to 1.6 • 1" NPT Suction and Discharge Ports • Self-priming to 6 Ft. • Self-Cleaning, Semi-Open Impeller
• Cast Iron Construction for Abrasive Resistance and Durability • Silicon Carbide/Viton? Mechanical Seal • Buna-N Check Valve and O-Ring • Self-Priming to 20 Ft. • Stainless Steel Semi-Open, Clog Resistant Impeller • Easy Cleanout Design - Pull-from-Rear Design Permits Clean Out and Repair Without Removing Piping
Cast Iron & Stainless Steel Construction
Buna-N Mechanical Seals on Cast Iron Models
Viton® Mechanical Seals on Stainless Steel Models
Optional Silicon Carbide Mechanical Seals Available
1-1/", 1-1/2" or 2" NPT Suction and Discharge Port Sizes
Dual Volute Design Reduces Radial Load on Motors
Maximum Temperature - Buna-N: 180° F, Viton®: 200°F
Self-Cleaning, Semi-Open Impeller
Heavy Duty Cast Iron Pedestal Drive with Sealed Ball Bearings
AMT Self-Priming Centrifugal Pedestal pumps are designed for a wide range of industrial, agricultural and commercial applications. Dual volute design reduces radial load on bearings and motor. Heavy duty cast iron construction with Buna-N seals or stainless steel with Viton® seals. Pumps are fitted with a self-cleaning, semiopen impeller and are coupled to a heavy duty cast iron bearing housing with a CNC machined keyed shaft extension and sealed ball bearings. The pump has been designed for either direct connection or belt drive. The maximum recommended RPM is 4,000.
Port: 2? NPT
Hp Class: 4
Engine Type: Honda GC160
Materials: Thermoplastic
Seal: Buna-N
Base and Handle: No
Run Time (Hours) : 1.5
Tank Size (Gal/Ltr.) : 0.47/1.7
Ship Wt. (Lbs.) : 45
The AMT line of Engine Driven Dewatering pumps offers economy, durability, portability and performance all in one neat package. Ideal for general purpose dewatering, irrigation, spraying, washdown and agricultural applications. Cast iron pumps feature dual volute design that reduces radial load on engine. Built-in check valve enables constant self-priming to 20 feet. Pump construction materials available in cast iron or corrosive resistant polypropylene components featuring removable/replaceable volute and impeller. Pumps are available with Briggs & Stratton or Honda engines. Viton®, EPDM and Silicon Carbide mechanical seal options are available on specific models.
Heavy Duty Cast Iron
Buna-N or Viton® Mechanical Seal Options
2" to 3" NPT Port Sizes
Self-Priming up to 20 Ft.
Semi-Open, Clog Resistant Impeller
Heavy Duty Steel Roll Frame Included
Built-in Check Valve
Optional Wheel Kit Available
The AMT line of Engine Driven Solids Handling pumps offers an upgraded debris handling capability in wear resistant cast iron construction. Applications include: high volume liquid transfer, irrigation, commercial draining and construction. All models feature durable all cast iron construction and clog-resistant impeller to ensure a long life for the complete pump. Dual volute design reduces radial load on engines.
The D2475-80 is a portable air compressor unit suitable for use in a variety of military and civilian applications. The unit is a reciprocating, 15 cfm, 175-psig diesel engine driven compressor mounted on an 80-gallon tank, with peripheral hardware including an electric starter, air hose, 5 air hose connectors, regulators, and an oil and water separator system. Operating temperatures have been verified in any ambient temperature from +120 degrees F (49 degrees C) to -25 degrees F (-32 degrees C). The unit contains a 5 gallon fuel tank. Actual unit may appear slightly different than pictured.
High Chromium Stainless Steel Internal Components Resist Wear from Sea Water Mixed with Abrasive Sand
Silicon Carbide Mechanical Seal Resists Abrasives and Extends Seal Life
Heavy Duty Cast Iron Casing and Adapter Ensures Durability for Severe Service Conditions
O-Ring Casing Seal for Ease of Service and Cleaning
Engine Options: Honda Gasoline & Hatz Diesel Engines
Maximum Solids Handling 1/2"
Self-Primes to 10 Feet in 1 Minute with Maximum Suction Lift of 20 Feet
Maximum Flow 173 GPM
Discharge Pressure up to 44 PSI
AMT Engine Driven Dredging Pump is designed for pumping sea water and fresh water containing up to 25% sand, debris and other abrasive particles. This unit can be used for other marine applications including dredging, pile driving, pier maintenance, emergency bilging and wash down. This pump is constructed of wear resistant high chromium stainless steel internal components that are designed to last for over 500 hours of service with regular maintenance of rinsing pump after each use. The high chromium stainless steel components are investment cast and CNC machined for maximum efficiency, performance and quality. Dual volute design reduces radial load on engine. The 4-bolt casing design and removable type volute offers simple maintenance and fast cleanout of the pump.
• Cast Iron Construction • Buna-N Mechanical Seal and O-Ring • Optional Viton? or Silicon Carbide Mechanical Seal and O-Ring • 1" & 1-1/4" NPT Suction and Discharge Ports • Self-Priming to 20 Ft. • Self-Cleaning, Semi-Open Impeller
• Cast Iron Construction with Buna-N Seals • 2" NPT Port Size • Self-Priming up to 20 Feet with Built-in Check Valve • Self-Cleaning, Clog Resistant Impeller • 1-1/2 to 3 HP Single or Three Phase 3450 RPM Motors (ODP or TEFC) • Optional Silicon Carbide Seals Available
• Available in: 300 Series Investment Cast Stainless Steel, Cast Bronze and Cast Iron Construction with Stainless Steel Impeller • Buna-N Mechanical Seal and O-Ring on Cast Iron Models • Viton? Mechanical Seal and O-Ring on Stainless Steel and Bronze Models • Optional Silicon Carbide Seals Available • Front Drain Plugs Located 90? Apart • 2 HP to 15 HP NEMA Motors, Single and Three Phase
• Ryton? Construction with Teflon? Seals and Ryton? Vanes • Self-Priming and Includes Suction and Discharge Tube • Ryton? Construction with Ryton? Rotor and Vanes • 6 GPM @ 70 RPM (11 oz./Stroke) • 1" O.D. Ryton? Discharge Spout Assembly • 1" I.D. x 45" Ryton? Suction Tube Assembly
• EPDM/EPR Mechanical Seal and Casing O-ring, Buna-N Option Available • High Efficiency, Investment Cast Stainless Steel Closed Impeller • Accessory Mounting Flanges Available 3/4" to 2" NPT • 4-Bolt Flange Allows 360? Mounting Rotation in 90? Increments • Single Phase 1/4 HP, 1725 RPM, 115 VAC ODP 56J Motor with Overload Protection • Standard NEMA 56J Motor Mounting Dimensions
