• Cast Iron Construction for Abrasive Resistance and Durability • Silicon Carbide/Viton? Mechanical Seal • Buna-N Check Valve and O-Ring • Self-Priming to 20 Ft. • Stainless Steel Semi-Open, Clog Resistant Impeller • Easy Cleanout Design - Pull-from-Rear Design Permits Clean Out and Repair Without Removing Piping
• 300 Series Investment Cast Stainless Steel Construction • Viton? Mechanical Seal and O-Ring • Handles Liquids and Chemicals with Specific Gravities up to 1.6 • 1" NPT Suction and Discharge Ports • Self-priming to 6 Ft. • Self-Cleaning, Semi-Open Impeller
• Cast Iron Construction • EPDM/EPR Mechanical Seal and O-Rings • Discharge Port Rotates in 45? Increments • Solids Handling, Clog Resistant Impeller • 1/2 to 3 HP Dual Cycle 50/60 Hz TEFC 56J NEMA Single or Three Phase Motors • 3/4" to 2" NPT Sizes
• Cast Iron Construction with 300 Series Investment Cast Stainless Steel Impeller • Buna-N Mechanical Seal and O-Ring • Optional Viton? Seal, Check Valve and O-Ring Available on Single Stage Models • 1-1/2" or 2" NPT Ports Sizes • Self-Priming to 20 Ft. • Single Stage Models Feature Removable Dual Volute Design
Cast Iron & Stainless Steel Construction
Buna-N Mechanical Seals on Cast Iron Models
Viton® Mechanical Seals on Stainless Steel Models
Optional Silicon Carbide Mechanical Seals Available
1-1/4", 1-1/2" or 2" NPT Suction and Discharge Port Sizes
Dual Volute Design Reduces Radial Load on Motors
Maximum Temperature - Buna-N: 180° F, Viton®: 200°F
Self-Cleaning, Semi-Open Impeller
Heavy Duty Cast Iron Pedestal Drive with Sealed Ball Bearings
AMT Self-Priming Centrifugal Pedestal pumps are designed for a wide range of industrial, agricultural and commercial applications. Dual volute design reduces radial load on bearings and motor. Heavy duty cast iron construction with Buna-N seals or stainless steel with Viton® seals. Pumps are fitted with a self-cleaning, semiopen impeller and are coupled to a heavy duty cast iron bearing housing with a CNC machined keyed shaft extension and sealed ball bearings. The pump has been designed for either direct connection or belt drive. The maximum recommended RPM is 4,000.
High Chromium Stainless Steel Internal Components Resist Wear from Sea Water Mixed with Abrasive Sand
Silicon Carbide Mechanical Seal Resists Abrasives and Extends Seal Life
Heavy Duty Cast Iron Casing and Adapter Ensures Durability for Severe Service Conditions
O-Ring Casing Seal for Ease of Service and Cleaning
Engine Options: Honda Gasoline & Hatz Diesel Engines
Maximum Solids Handling 1/2"
Self-Primes to 10 Feet in 1 Minute with Maximum Suction Lift of 20 Feet
Maximum Flow 173 GPM
Discharge Pressure up to 44 PSI
AMT Engine Driven Dredging Pump is designed for pumping sea water and fresh water containing up to 25% sand, debris and other abrasive particles. This unit can be used for other marine applications including dredging, pile driving, pier maintenance, emergency bilging and wash down. This pump is constructed of wear resistant high chromium stainless steel internal components that are designed to last for over 500 hours of service with regular maintenance of rinsing pump after each use. The high chromium stainless steel components are investment cast and CNC machined for maximum efficiency, performance and quality. Dual volute design reduces radial load on engine. The 4-bolt casing design and removable type volute offers simple maintenance and fast cleanout of the pump.
Heavy Duty Cast Iron
Buna-N or Viton® Mechanical Seal Options
2" to 3" NPT Port Sizes
Self-Priming up to 20 Ft.
Semi-Open, Clog Resistant Impeller
Heavy Duty Steel Roll Frame Included
Built-in Check Valve
Optional Wheel Kit Available
The AMT line of Engine Driven Solids Handling pumps offers an upgraded debris handling capability in wear resistant cast iron construction. Applications include: high volume liquid transfer, irrigation, commercial draining and construction. All models feature durable all cast iron construction and clog-resistant impeller to ensure a long life for the complete pump. Dual volute design reduces radial load on engines.
DSL-023 -
JERRY CAN HOLDER (RED BASE) JERRY CAN HOLDER (RED BASE) for mounting the Olive Drab fuel can onto the D2475-80 Diesel Air Compressor. Comes complete with mounting strap.
• Aluminum Construction • Viton? Mechanical Seal and O-Ring • 1" NPT Suction and Discharge Ports • 1/3 HP Open Drip Proof (ODP) Motor with 8 Ft. 115 VAC Power Cord • Self-cleaning Impeller • (2) NPT Garden Hose Adapters, Base and Carry Handle Included
• Cast Iron Construction with Buna-N Seals • 2" NPT Port Size • Self-Priming up to 20 Feet with Built-in Check Valve • Self-Cleaning, Clog Resistant Impeller • 1-1/2 to 3 HP Single or Three Phase 3450 RPM Motors (ODP or TEFC) • Optional Silicon Carbide Seals Available
• Polypropylene Construction with Teflon? Seals and Ryton? Vanes • Self-Priming and Includes Suction and Discharge Tube • Polypropylene Construction with Ryton? Rotor and Vanes • Teflon? Seal • 6 GPM @ 70 RPM (11 oz./Stroke) • 1" O.D. Ryton? Discharge Spout Assembly
• Cast Iron with Stainless Steel Motor Housing • Carbide Tipped Shredder Impellers • Spiral Shredder Mechanism Plate Surface Hardened for Enhanced Cutting Ability • Triplex Seal System: Double Mechanical Seals Plus Shaft Seal • Lower Seal - Silicon Carbide • 115, 230 or 460 VAC @ 60 Hz Available
• EPDM/EPR Mechanical Seal and Casing O-ring, Buna-N Option Available • High Efficiency, Investment Cast Stainless Steel Closed Impeller • Accessory Mounting Flanges Available 3/4" to 2" NPT • 4-Bolt Flange Allows 360? Mounting Rotation in 90? Increments • Single Phase 1/4 HP, 1725 RPM, 115 VAC ODP 56J Motor with Overload Protection • Standard NEMA 56J Motor Mounting Dimensions
• 300 Series Investment Cast Stainless Steel Construction • Viton? Mechanical Seal and O-Ring • Handles Liquids and Chemicals with Specific Gravities up to 1.6 • 1" NPT Suction and Discharge Ports • Self-priming to 6 Ft. • Self-Cleaning, Semi-Open Impeller
• Cast Iron Construction with 300 Series Investment Cast Stainless Steel Impellers • Buna-N Mechanical Seal and O-Ring • Optional Viton? Seal, Check Valve and O-Ring Available on Single Stage Models • 1-1/2" or 2" NPT Ports Sizes • Self-Priming to 20 Ft. • Single Stage Models Feature Removable Dual Volute Design
