• EPDM/EPR Mechanical Seal and Casing O-ring, Buna-N Option Available • High Efficiency, Investment Cast Stainless Steel Closed Impeller • Accessory Mounting Flanges Available 3/4" to 2" NPT • 4-Bolt Flange Allows 360? Mounting Rotation in 90? Increments • Single Phase 1/4 HP, 1725 RPM, 115 VAC ODP 56J Motor with Overload Protection • Standard NEMA 56J Motor Mounting Dimensions
• 300 Series Investment Cast Stainless Steel Construction • Viton? Mechanical Seal and O-Ring • Handles Liquids and Chemicals with Specific Gravities up to 1.6 • 1" NPT Suction and Discharge Ports • Self-priming to 6 Ft. • Self-Cleaning, Semi-Open Impeller
• Cast Iron Construction with EPDM/EPR Seals • Easy Cleanout Pull From Rear Design • 1" to 2" NPT Port Sizes • Self-Priming up to 20 Feet with Built-in Check Valve • Self-Cleaning, Clog Resistant Impeller • 1/2 to 3 HP 56J Dual Cycle 50/60 Hz Single or Three Phase TEFC Motors
• Available in: 300 Series Investment Cast Stainless Steel, Cast Bronze and Cast Iron Construction with Stainless Steel Impeller • Buna-N Mechanical Seal and O-Ring on Cast Iron Models • Viton? Mechanical Seal and O-Ring on Stainless Steel and Bronze Models • Optional Silicon Carbide Seals Available • Front Drain Plugs Located 90? Apart • 2 HP to 15 HP NEMA Motors, Single and Three Phase
Buna-N or Viton® Mechanical Seal, Depending on Specific Model
Optional Seals Available
Maximum Temperature 180° F
Self-Priming to 20 Ft
Shaft Diameter - 2" Models: 3/4", 3" and 4" Models: 1-1/8"
Sized From Minimum 3 HP to 15 HP Driver at 3,600 RPM, Depending on Model
AMT Self-Priming Solids Handling Pedestal pumps are designed for direct or belt drive. Specific units are available in cast aluminum, cast iron or thermoplastic construction material. The units feature 3/8" to 2" solids handling construction and are fitted with a cast iron bearing housing, which contains two or three precision sealed ball bearings depending on specific model. Easy cleanout design by removing casing bolts permits removal of debris without disconnecting hoses. The 3" & 4" trash pump models feature cleanout covers with quick release handles for removal of debris. All units are self-priming to 20 feet.
• Cast Iron with Stainless Steel Motor Housing • Carbide Tipped Shredder Impellers • Spiral Shredder Mechanism Plate Surface Hardened for Enhanced Cutting Ability • Triplex Seal System: Double Mechanical Seals Plus Shaft Seal • Lower Seal - Silicon Carbide • 115, 230 or 460 VAC @ 60 Hz Available
• EPDM/EPR Mechanical Seal and Casing O-ring, Buna-N Option Available • High Efficiency, Investment Cast Stainless Steel Closed Impeller • Accessory Mounting Flanges Available 3/4" to 2" NPT • 4-Bolt Flange Allows 360? Mounting Rotation in 90? Increments • Single Phase 1/4 HP, 1725 RPM, 115 VAC ODP 56J Motor with Overload Protection • Standard NEMA 56J Motor Mounting Dimensions
• 300 Series Investment Cast Stainless Steel Construction • Viton? Mechanical Seal and O-Ring • Handles Liquids and Chemicals with Specific Gravities up to 1.6 • 1" NPT Suction and Discharge Ports • Self-priming to 6 Ft. • Self-Cleaning, Semi-Open Impeller
• Cast Iron Casing and Column • 3/4" to 1-1/2" NPT Discharge Port • Includes Universal Mounting Bracket • Dual Volute Design Reduces Radial Load on Motor - NO BOTTOM BEARING! • Self-Cleaning, Semi-Open Stainless Steel Impeller • Available with Single or Three Phase 56C Motor
• Cast Iron Construction with 300 Series Investment Cast Stainless Steel Impellers • Buna-N Mechanical Seal and O-Ring • Optional Viton? Seal, Check Valve and O-Ring Available on Single Stage Models • 1-1/2" or 2" NPT Ports Sizes • Self-Priming to 20 Ft. • Single Stage Models Feature Removable Dual Volute Design
• Cast Iron Construction
• Buna-N Mechanical Seal and O-Ring
• Optional Viton or Silicon Carbide Mechanical Seal and O-Ring
• 1" & 1-1/4" NPT Suction and Discharge Ports
• Self-Priming to 20 Ft.
• Self-Cleaning, Semi-Open Impeller
• Cast Iron Construction with Buna-N Seals • 2" NPT Port Size • Self-Priming up to 20 Feet with Built-in Check Valve • Self-Cleaning, Clog Resistant Impeller • 1-1/2 to 3 HP Single or Three Phase 3450 RPM Motors (ODP or TEFC) • Optional Silicon Carbide Seals Available
• Cast Stainless Steel with Stainless Steel Impeller • Viton? Mechanical Seal and O-Ring • Optional Silicon Carbide Seals Available • Front Drain Plugs Located 90? Apart • 2 HP to 15 HP NEMA Motors, Single and Three Phase • Optional Mounting Base Available
• Cast Iron Construction with EPDM/EPR Seals
• Easy Cleanout Pull From Rear Design
• 1" to 2" NPT Port Sizes
• Self-Priming up to 20 Feet with Built-in Check Valve
• Self-Cleaning, Clog Resistant Impeller
• 1/2 to 3 HP 56J Dual Cycle 50/60 Hz Single or Three Phase TEFC Motors
Buna-N or Viton® Mechanical Seal, Depending on Specific Model
Optional Seals Available
Maximum Temperature 180° F
Self-Priming to 20 Ft
Shaft Diameter - 2" Models: 3/4", 3" and 4" Models: 1-1/8"
Sized From Minimum 3 HP to 15 HP Driver at 3,600 RPM, Depending on Model
AMT Self-Priming Solids Handling Pedestal pumps are designed for direct or belt drive. Specific units are available in cast aluminum, cast iron or thermoplastic construction material. The units feature 3/8" to 2" solids handling construction and are fitted with a cast iron bearing housing, which contains two or three precision sealed ball bearings depending on specific model. Easy cleanout design by removing casing bolts permits removal of debris without disconnecting hoses. The 3" & 4" trash pump models feature cleanout covers with quick release handles for removal of debris. All units are self-priming to 20 feet.